User:
Resistors in series (3)
Storyboard 
When several resistors are connected in series, the current is the same in all resistors due to the conservation of loads. Therefore, in each resistance a potential drop equal to the electrical resistance multiplied by the current is experienced and whose sum must be the total potential difference. Therefore, the total resistance of a series of resistors is equal to the sum of these.
ID:(2119, 0)
Model
Top
Parameters
Variables
Calculations
to 
, then, select the variable: 
to 
Calculations
Calculations
Variable 
Given Calculate 
Target : Equation To be used 
Equations
$ \Delta\varphi = \Delta\varphi_1 + \Delta\varphi_2 + \Delta\varphi_3 $
Dphi = Dphi_1 + Dphi_2 + Dphi_3
$ \Delta\varphi = R_s I $
Dphi = R * I
$ \Delta\varphi_1 = R_1 I $
Dphi = R * I
$ \Delta\varphi_2 = R_2 I $
Dphi = R * I
$ \Delta\varphi_3 = R_3 I $
Dphi = R * I
$ R_s = R_1 + R_2 + R_3 $
R_s = R_1 + R_2 + R_3
ID:(16020, 0)
Series resistance (3)
Equation
In the case of two resistors connected in series, the resistance in Series ($R_s$) is equal to the sum of the resistance 1 ($R_1$), the resistance 2 ($R_2$) and the resistance 3 ($R_3$). This relationship is expressed as:
kyon
ID:(16005, 0)
Sum of potential difference (3)
Equation
By the principle of energy conservation, the potential difference ($\Delta\varphi$) is equal to the sum of the difference of potential 1 ($\Delta\varphi_1$), the difference of potential 2 ($\Delta\varphi_2$) and the difference of potential 3 ($\Delta\varphi_3$). This can be expressed through the following relationship:
| $ \Delta\varphi = \Delta\varphi_1 + \Delta\varphi_2 + \Delta\varphi_3 $ |
ID:(16013, 0)
Ohm's law (1)
Equation
Traditional Ohm's law establishes a relationship between the potential difference ($\Delta\varphi$) and the current ($I$) through the resistance ($R$), using the following expression:
| $ \Delta\varphi = R_s I $ |
| $ \Delta\varphi = R I $ |
None
ID:(3214, 1)
Ohm's law (2)
Equation
Traditional Ohm's law establishes a relationship between the potential difference ($\Delta\varphi$) and the current ($I$) through the resistance ($R$), using the following expression:
| $ \Delta\varphi_1 = R_1 I $ |
| $ \Delta\varphi = R I $ |
None
ID:(3214, 2)
Ohm's law (3)
Equation
Traditional Ohm's law establishes a relationship between the potential difference ($\Delta\varphi$) and the current ($I$) through the resistance ($R$), using the following expression:
| $ \Delta\varphi_2 = R_2 I $ |
| $ \Delta\varphi = R I $ |
None
ID:(3214, 3)
Ohm's law (4)
Equation
Traditional Ohm's law establishes a relationship between the potential difference ($\Delta\varphi$) and the current ($I$) through the resistance ($R$), using the following expression:
| $ \Delta\varphi_3 = R_3 I $ |
| $ \Delta\varphi = R I $ |
None
ID:(3214, 4)